The Gadgets Page

June 3, 2010

The Case For Automating Your Windows

Filed under: Green Gadgets,Misc. Gadgets — Matthew Strebe @ 1:04 pm

We pay for a lot of power at the highest billing rate in Southern California because we have eight people living in a 5000 square foot home. When we moved in, our average summer time power bill exceeded $700 per month. Cooling the house with A/C was ridiculously expensive, and it put me on a quest to reduce power usage dramatically. I wish I could say I wanted to save the environment, but it was the money that motivated me.

So I looked at my options and came up with two potential solutions to the massive power bills: Solar, and on-site natural gas cogeneration. Either would be big, expensive projects, so in the mean time, we just ran around the house and opened the windows whenever it got hot, leaving the A/C off.

With my roof and location, I can get up to 3.5Kw of solar power generation installed for about $20K. Going through the numbers, it looks like I’ll reduce my power bill by about $220/mo. on average.

Automated WindowsAs we tired of the daily window opening and closing, I setup a simple home automation system to automate the problem. I put motors on the crank-style casement windows and used a $300 home automation controller to setup simple rules, such as “Open the windows if it’s cool outside and hot inside.” The whole setup cost less than $2000 and took me about three days to get running, most of which consisted of fishing wires through the walls to the window motors.

Then I looked into on-site natural gas cogeneration. Natural gas energy is much cheaper than electricity in California, but unfortunately cogeneration wasn’t feasible with a generator. While possible technically, the generators wear out every year. They’re noisy, and it’s not clear that they’re legal. On cost grounds, by my analysis, it would be twice as expensive as paying for power due to the short generator lifetime. I looked at fuel cells as well: Highly efficient, silent, and long-lived, but also very expensive. The payout would be fifty or so years, longer than the unit’s lifetime.

When I revisited the power bill after automating the windows, I discovered that this simple, interim solution had reduced our power bill by over $300 per month! The house was comfortable all the time, and the A/C hadn’t come on since I got the system running. A $2000 investment in home automation equipment would be paid back in just seven months, and was reducing more utility bill costs than a $20,000 solar system would.

The system automatically opens and closes the windows based on the home’s interior temperature compared to the weather outside. I have a simple program that runs on a $300 embedded controller computer (a Universal Devices ISY-99) that monitors the inside temperature, an RSS feed of the weather station where I live, time-of-day, and likelihood of rain, and makes decisions about whether and when to open or close the windows.

This setup saves me, on average, $320/mo. compared to the months when we first moved in and left the windows shut and the A/C and heat on a 68/74 degree thermostatic setting. Those months we were averaging over $740/mo. for power, and now we’re averaging $360.

Before you spend a lot of money on generating electricity, do everything you can to reduce your electrical use. Big wins for us included eliminating AC with natural ventilation and ceiling fans, replacing CRT and plasma televisions with LCD, replacing old appliances with new more efficient models, cold-water laundry, and line-drying clothes. We now have our power consumption down by two-thirds over-all, and have reached a point where adding solar may take us down to zero.

I used Truth casement window operators and controllers from, and INSTEON I/O Linc modules, and an ISY-99 home automation controller from to implement this project.


  1. This is an amazing idea and I am kind of surprised there is nothing like this on the market! The only thing, how hard is it to turn off the automated, for example if you were leaving and didnt want the windows open? can it be time controlled to only do taht while you are at home, and not when at work?

    Comment by Layla at Postal Gold — June 25, 2010 @ 2:38 am

  2. Hi Layla–My automated windows are on the second floor, so I currently don’t do anything about them. The right way to do it would be to put an INSTEON KeyPadLinc toggle light switch near each door that has an “Away” button. You’d turn it on when you arrive home, and off when you leave (like an alarm system) and the window controller would be programmed to keep windows closed when you are away.

    Comment by Matthew — June 25, 2010 @ 10:38 am

  3. Maybe this is a silly question but is there an app or web interface that can be hooked up so you can open and close your windows from something like an iPhone?

    Comment by Gary Ruplinger — August 13, 2011 @ 7:07 am

  4. Hi Gary–For INSTEON, there are about ten iPhone apps. I use one called MobiLink Pro, and it does exactly what you describe.

    Comment by Matthew — August 13, 2011 @ 11:00 am

RSS feed for comments on this post.

Sorry, the comment form is closed at this time.

Powered by WordPress
(c) 2003-2017 Michael Moncur, Laura Moncur, Matthew Strebe, and The Gadgets Page